Building a 550hp 1JZ Nissan 240SX - in 10 Minutes!

Staff Inspection : Season 1, Episode 50

January 30, 2020

Check out Vin's whole Staff Inspection build series on his 1JZ swapped Nissan 240sx here: https://www.youtube.com/playlist?list=PLrb6aESuXlD5NV4KlG4zJMn0bhzWPw7AX

BUILD SPECS:

Engine-1JZ VVTi from @jdmcalifornia
*for a full list of maintenace items needed CLICK HERE:
https://www.youtube.com/watch?v=LkEQDEWIrP4&t=646s
Transmission- CD00A 6 speed with Collins adapter @collinsgarage

- Power Adder (setup):
-
Garret GTX3076r GenII with v-band .81a/r turbine housing @turbobygarrett
- Plazmaman billet intake manifold, fuel rail, throttle body and plazma-clamps - @plazmamanracing
-  Future Fab V-Band exhaust manifold - @futurefab_jon
- Chase Bays tucked rad, brake booster delete and clutch slave- @chasebays
- Deatschwerks 1200cc injectors- @deatschwerks
- Alariatech Oil Catch Can

Electronics:
-
Rywire PDM and Body Harness- @rywire_motorsports_electronics
- AEM Infinity ECU - @aemelectronics
- Thorn Industries Coil Pack - @thornindustries
- Bisimoto Flexfuel Tune - @bisimoto

Suspension and Chassis:
- KW Clubsport 2-way coilovers- @kwsuspension
- ISR Arms- @ISRperformance
- OS Giken Superlock LSD - @osgiken
- Team Hang Loose Drop Spindles -  @teamhangloose

Interior

- Recaro Profi XL Seats- @recaroautomotive
- Street Faction Ultra-low Mounts - @streetfaction
- Custom Ti delete Panels - @chasingJs
- AEM CD5 digital Display- @aem electronics

Exterior
- BBS LM 18x9.5 /18x10.5 @bbs.wheels
- Origin 55mm fenders
- JDM Front bumper
- Seibon Carbon Hood, doors, panels and trunk - @seiboncarbon
- Paint by Strassesport - @strassesport